Nitrocellulose paint
Packing Sizes 4 LT
Is made from nitrocellulose chips plasticizes non-drying alkyd and is suitable for plasticized and weather-resistant pigments.
VALUE NITROCELLULOSE:
Is a suitable coating for refinishing saloon cars and even trucks and buses.
SURFACE PREPARATION:
Ensure that the surface to be painted is clean free from all dents, dirt, grease, etc.
APPLICATION:
Dilute value nitrocellulose paint using high gloss thinner for improved gloss and good flow and apply a minimum of two coats, a minimum of 1/2 hour between the coats.
Hardner
Packing Sizes 1 LT \ 1/2 LT \ 1/4 LT
- Automotive refinish comprehensive and full capability
- High performance coatings advanced formula
Comprises:
Xylene, Acetates, and additives mixed in different ratio for best 2K results.
THINNER
Packing Sizes 1 LT \ 1/2 LT
Comprises:
Xylene, Acetates, Toluene, Glycol ethers and 2-ethoxy ethyl Acetate in well-calculated percentages to give excellent results when used in basecoats.
Clear coat
Packing Sizes 1 LT \ 1/2 LT
Automotive refinish comprehensive and full capability
High performance coatings advanced formula
Light weighT BODY FILLER
Packing Sizes 5 KG \ 2.5 KG \ 1 KG \ 1/2 KG
- Ensure the metal surface to be filled using Value Body Filler is free from any rust, grease, oil, and dirt.
- Ensure damaged coatings and rusted surfaces are properly cleaned before using Value Body Filler.
- Sand the bare metal surface to ensure maximum adhesion before application.
- Mix the sufficient filler with 1-3 % peroxide hardener enough for a particular application and use the blend the same day otherwise it will harden.
- Apply the blend on a bare metal surface using the provided plastic spreader.
- While using either a blade file or a suitable sandpaper file cure or dry filler as necessary.
- Finally proceed with the application of a suitable primer.